Epoxy Flood

Rather than buying just a litre of epoxy, Nine45 sold me an entire ChemTec kit of 11.34 litres. That’s probably more epoxy than I’ve used in my life so far. I mixed about a half litre for painting the top side of the fountain base. I used less than a quarter of it painting the entire top and sides. Then I added small bits of the sample EcoPoxy colour powders that I have. To mix them into the epoxy I used a small painter’s brush to blend them in. I had prepared a tray for the excess. It’s about a third full. This epoxy is quite low viscosity, with a 72 hour cure time. I may do a transparent second coat on the base once this one is cured.

Leave a Reply